series ame5-jz 5 watt | ac-dc / dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.a 1 of 3 north america only features: models single output model input voltage (vac/hz) input voltage (vdc) max output wattage (w) output voltage (v) output current max (a) maximum capacitive load (f) efficiency (%) 230 vac ame5-3.3sjz 85-305/47-63 100-430 4 3.3 1.25 4000 72 ame5-5sjz 85-305/47-63 100-430 5 5 1 4000 77 ame5-9sjz 85-305/47-63 100-430 5 9 0.55 1800 79 ame5-12sjz 85-305/47-63 100-430 5 12 0.42 1800 81 AME5-15SJZ 85-305/47-63 100-430 5 15 0.33 1500 82 ame5-24sjz 85-305/47-63 100-430 5 24 0.23 330 84 input specifications parameters conditions typical maximum units current (full load) 115 vac 125 ma 230 vac 80 ma inrush current <2ms (cold start) 115 vac 10 a 230 vac 15 a leakage current ? output specifications parameters conditions typical maximum units voltage accuracy 2 % line regulation (ll-hl) 0.5 % load regulation 10-100% load 1 % ripple & noise 100 mv p-p hold-up time 115 vac 15 ms 230 vac 80 ms isolation specifications parameters conditions typical rated units tested i/o voltage input to output, 60 sec 3000 vac input to ground 2000 isolation resistance >1000 m ? general specifications parameters conditions typical maximum units switching frequency 65 132 khz over current protection 110 % of iout over voltage protection over voltage shutdown short circuit protection auto recovery operating temperature see derating curve -40 to +70 c maximum case temperature 100 c storage temperature -40 to +105 c temperature coefficient 0.02 % / c ? i/o isolation 3000vac ? low ripple and noise ? operating temp: -40c to +70c ? over voltage protection ? over current protection ? input: 85-305vac, 47-63hz, or 100-430vdc ? up to 84% efficiency ? short circuit protection click on series name for product info on aimtec.com
series ame5-jz 5 watt | ac-dc / dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.a 2 of 3 north america only general specifications (continued) parameters conditions typical maximum units cooling free air convection humidity non condensing 95 % rh case material plastic (flammability to ul 94v-0) weight 75 g dimensions (l x w x h) 55.0 x 45.0 x 21.0 mm (2.17 x 1. 77 x 0.83 inches) mtbf > 300 000 hrs (mil-hdbk -217f, t=+25 o c)/ full load note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage (115/230vac) and at rated output load unless otherwise specified. safety specifications parameters agency approvals ce, ul standards information technology equipment iec/en/ul 60950-1 emi - conducted and radiated emission en55022, class b en55024: 2010 electrostatic discharge immunity iec 61000- 4-2: contact 6kv/air 8kv, criteria b rf, electromagnetic field immunity iec 61000-4-3: 10v/m, criteria a electrical fast transient/burst imm unity iec 61000-4-4: 2kv, criteria b surge immunity iec 61000-4-5: 1kv/2kv, criteria b rf, conducted disturbance immunity iec 61000-4-6: 10vrms, criteria a power frequency magnetic field immunity iec 61000-4-8: 10a/m, criteria a voltage dips, short interruptions imm unity iec 61000-4-11: 0-70%, criteria b typical application circuit pin out specifications vout c2 tvs 3.3 & 5v 330 f/50v 7a 9v 120 f/50v 12a 12v 120 f/50v 20a 15v 68 f/50v 20a 24v 68 f/50v 30a pin single 1 earth/ground 2 ac input (l) 3 ac input (n) 4 - v output 5 + v output ac dc ac ? l ac ? n + ? vout \? vout single ? output mov s14k350 fuse 3.15a/300v c1 1f/50v ac ? l ac ? n + ? vout \? vout ??? c2 + tvs earth/gnd
series ame5-jz 5 watt | ac-dc / dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052e r8.a 3 of 3 north america only dimensions 55.00 (2.17) 45.00 (1.77) bottom view 1 2 4 7.25 (0.29) 40.50 (1.59) 6.00 (0.24) 1.00 (0.04) 12.50 (0.49) 14.50 (0.57) 21.00 (0.83) case tolerance 0.50 (0.02) pin diameter 1.0 0.10 (0.04 0.004) dimensions mm (inch) ? 1.50 (? 0.06) div: 10.00 (0.40) top view 1 2 5 4 3 5 3 16.00 (0.63) 10.00 (0.39) derating note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety a gency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conduct ed destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are consi dered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear contr ol systems or other such applications which necessitate specific safety and regulatory st andards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s standard terms of sale available at www.aimtec.com. -40 -20 0204060 80 100 100 80 60 40 20 0 safe operating area 100% load 100-277vac or 120-390vdc output power (%) ambient temperature o c free air convection 55 -10 70 85 (100) 100 (120) 305 (430) 100 80 60 40 20 0 safe operating area output power (%) free air convection at 25c input voltage vac (vdc) 277 (390) 75
|
